Manuals / Brands / Household Appliance / Plumbing Product / Panasonic / Household Appliance / Plumbing Product

Panasonic M1111TY0 -FJ, VQT3U71A(E) 2-2-3. Setting the DVI output signals

1 145

Download 145 pages, 1.38 Mb

90

2. Input/output signal settings

2-2-3. Setting the DVI output signals

Set the DVI output signals of the standard output (DVI OUT) and the DVI output signals if the DVI/analog output board (option)

has been connected.

On the Output sub menu, use [F2] to select the output to be set using the Select item.

 Refer to “2-2. Output signal settings”.

Use [F1] to display the DVI Output sub menu.

Use [F2] to select the signal system using the Mode item.

 Set this when the DVI/analog output board (AV-HS04M5) has been connected.

Digital DVI digital signals are output from the DVI connector.

Analog DVI analog signals (RGB) are output from the DVI connector.

When “Analog” has been selected, the display position of the image may be off depending on the monitor

which is connected. If it is off, adjust the position at the monitor.

For details on the adjustment method, refer to the operating instructions of the monitor.

Use [F3] to select the resolution of the images to be output using the Size item.

Auto The equipment information of the output destination is captured by the DVI signals, and the images are

output at the optimum resolution.

The vertical frequency is 60 Hz, and the maximum resolution is SXGA for analog output signals and

WUXGA for digital output signals.

If the equipment information cannot be captured or if the resolution and frequency which can be output by

the unit are not contained in the equipment information, the images will be output at the XGA setting.

Other signals are listed in the table below.

<Table of DVI output signal settings>

DVI output signal Standard output (DVI OUT) DVI/Analog Output Board

Size Output (Digital) (Digital) (Analog)

XGA (1024  768)/60 Hz 

WXGA (1280  768)/60 Hz 

SXGA (1280  1024)/60 Hz 

WSXGA+ (1680  1050)/60 Hz 

—

UXGA (1600  1200)/60 Hz 

—

WUXGA (1920  1200)/60 Hz 

—

1080/59.94p (1920  1080)/59.94 Hz 

—

1080/50p (1920  1080)/50 Hz 

—

1080/59.94i (1920  1080)/59.94 Hz ——

1080/50i (1920  1080)/50 Hz ——

720/59.94p (1280  720)/59.94 Hz ——

720/50p (1280  720)/50 Hz ——

: Can be set.

—: Cannot be set.

The DVI signals cannot be output if the system format is 1080/23.98PsF or 1080/24PsF.

Contents

Main Operating Instructions <Operations and Settings> Live Switcher Model No. Trademarks and registered trademarks About copyright and licence Abbreviations Illustrations and screen displays featured in the manual Contents Before use .................................................... 5 1. Basic operations ..................................... 7 Contents 2. Input/output signal settings ................. 74 3. System settings ................................... 102 4. External interfaces .............................. 111 Before use Overview Concerning the ratings display Disclaimer of warranty Network security Before use Concerning differences in the system versions How to check the system version Restrictions on menus and functions [Restrictions on menus] 1. Basic operations 1-1. Background transition 1-1-1. Selecting the bus 1-1-2. Selecting the bus using the SHIFT function 1-1-3. Selecting the bus mode 1-1-4. Selecting the transition mode 1-1-5. Manual transition 1-1-6. Auto transition 1-1-7. Cut transition 1-2. Wipe 1-2-1. Selecting the wipe pattern Table of wipe patterns 1-2-2. Selecting the wipe direction 1-2-3. Wipe decorations (border, soft effect) 1-2-4. Setting the wipe start position 1-2-5. Modifying wipe Page 1-2-6. Setting the latency 1-3. Key HS410 Key PinP1 PinP2 DSK HS410 1-3-1. Selecting the key type 1-3-2. Selecting the key material 1-3-3. Key transitions Page 1-3-4. Key preview 1-3-5. Adjusting the luminance key and linear key 1-3-6. Adjusting the chroma key Page Page Page Page Page 1-3-7. Key decorations 1-3-8. Masking the key signals 1-3-9. Flying key ABC 1-3-10. Setting the priority 1-4. PinP (picture in picture) 1-4-1. Selecting the PinP channel and material 1-4-2. Transition between PinP materials 1-4-3. Selecting Shape 1-4-4. PinP preview 1-4-5. PinP transitions 1-4-6. PinP adjustments SD HD SD 1-4-7. Linking PinP1 and PinP2 1-4-8. PinP decorations 1-4-9. Trimming settings 0 Use [F3] to select the operation to be performed during the manual setting using the Manual item. <Trimming settings> (figure shows the default values) 50 -50 500-50 1-5. DSK (downstream key) 1-5-1. Selecting the DSK type 1-5-2. Selecting the DSK material 1-5-3. DSK transitions 1-5-4. DSK preview 1-5-5. DSK adjustments 1-5-6. DSK decorations 1-5-7. Masking the DSK signals 1-6. Key Link 1-7. FTB (Fade to Black) 1-8. Internal color signals 1-8-1. Setting the color background 1-8-2. Setting the Wash effect Page 1-9. Switching the AUX output 1-9-1. Selecting the AUX output materials 1-9-2. AUX1 transitions 1-9-3. Setting enable/disable for the AUX1 transition 1-10. Memory 1-10-1. Memory registration and recall items 1-10-2. Storing the settings in the memory (Store) 1-10-3. Recalling the operations stored in the memory (Recall) 1-10-4. Memory preview T C T C 1-10-5. Deleting the operations stored in the memory (Delete) 1-10-6. Selecting the buses whose settings are to be registered and or played back 1-10-7. Registering the material selection items 1-10-8. Setting effect dissolve (shot memory) 1-10-9. Editing event memory timelines Page Basic operations T <Timeline displays (on the built-in display)> EMEM001 MEM-PVW PGM Page Page Page 1-10-10. Registering memories (Register) 1-11. Video memories 1-11-1. Recording still images (Still) 1-11-2. Recording moving images (Clip) 1-11-3. Saving Images in Flash Memory 1-11-4. Playing back moving images (Clip) 9 6 C . 0 T X P Page 1-12. Memory card Video memory (still image data: Still1, Still2): Video memories (moving image data: Clip1, Clip2): Shot memory data (Shot): Event memory data (Event): Page 1-12-1. Initializing the memory cards 1-12-2. Saving data on memory cards 1-12-3. Loading data from memory cards 1-12-4. Deleting files on memory cards 1-12-5. Displaying the memory card information 1-13. Waveform monitor settings 1-14. Setting the status display 2. Input/output signal settings 2-1. Input signal settings <List of settings by input signal> 2-1-1. Setting the frame synchronizer 2-1-2. Setting the input mode <List of input modes supported> 2-1-3. Setting the delay amount 2-1-4. Freezing the input signals 2-1-5. Setting the material names 2-1-6. Setting the up-converter 2-1-7. Setting the video process function 2-1-8. Setting the analog input gain (option) 2-1-9. Setting the analog composite input signals (option) 2-1-10. Setting the DVI input signals Page Page Page 2-1-11. Displaying the DVI input signal information 2-1-12. Adjusting the DVI input signals 2-1-13. Automatic adjustment of the black level and white level (analog input signals) 2-2. Output signal settings 2-2-1. Assigning the output signals 2-2-2. Setting the SDI output color range 2-2-3. Setting the DVI output signals Page 2-2-4. Setting the down-converter (option) 2-3. Setting the sync signals 2-4. Adjusting the output signal phase <Phase adjustment setup> AVDL Range: Range for automatic phase adjustment. <Phases and delay amounts of input/output signals during HD format use> Input signals Video effects Output signals Frame synchronizer <Phase relationship between input signals and output signals> (for 1080/59.94i format) (Example 1) (Example 2) 2-5. Setting the multi view display 2-5-1. Setting the screen layout 2-5-2. Setting the split frame and characters 2-5-3. Setting the tally displays 2-5-4. Changing the material names 2-5-5. Setting the level meters 2-5-6. Setting the input signal marks 2-5-7. Setting the markers 2-5-8. High-resolution multi view mode 2-6. Setting the ancillary data and embedded audio data 3-1. Setting the system format 3-2. Setting the crosspoints 3-2-1. Assigning signals to the crosspoints 3-2-2. Setting the crosspoint switching 3-3. Button assignments 3-3-1. Setting the user buttons 3-4. Setting the date and time 3-5. Network settings 3-6. Setting the built-in display backlight and button illumination 3-7. Status displays 3-7-1. Alarm status displays 3-7-2. Alarm message 3-7-3. Displaying the version information and option information 3-8. Initialization 3-8-1. Initializing setting data 3-8-2. Initializing fader 4. External interfaces 4-1. Setting the GPI I/O Control using the GPI Input port Page Page 4-2. LAN 4-3. EDITOR 4-4. COM 4-5. Plug-in software 5. Setting menu table Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page B C D E I K M O P S T V X