99
Settings
2. Input/output signal settings

2-5-4. Changing the material names

The material names of the input signals (SDI IN1 to SDI IN8,
DVI IN, IN-A1, IN-A2, IN-B1 or IN-B2) to be set on the multi
view display can be changed.
These names can be selected from the default settings or
user settings.
When the preset settings and user settings are established,
the material name (CAM1, etc.) is displayed.
On the Input sub menu, use [F2] to select the input to
be set using the Select item.
Refer to “2-1. Input signal settings”.
Use [F1] to display the Name sub menu.
Use [F2] to select the type of material names using the
Type item.
Default
(default
settings)
Select the material names from the following:
SDI IN1 to SDI IN8, DVI IN, IN-A1, IN-A2,
IN-B1 and IN-B2.
User
(user
settings)
The material names are set using up to 7
characters.
Preset type setting procedure
On the Name sub menu, use [F2] to select “Preset”
using the Type item.
Use [F3] to select the material name using the Name
item.
User type setting procedure
On the Name sub menu, use [F2] to select “User” using
the Type item.
Press [F3] to display the keyboard screen.
Using [F1] to [F3], input the name, and press [F4].
To clear the name which has been input and close the
keyboard screen, press [F5].
Refer to “2-2-2. Keyboard screen operations”
(<Basics> Operating Instructions).