51
Basic
operations
1. Basic operations

1-10-6. Selecting the buses whose settings

are to be registered and or played

back

Selecting the buses for registering memories
Select the bus used for registering shot memories and event
memories.
Press the e button to light its indicator, and display the
Shot Memory menu (or Event Memory menu).
Use [F1] to display the Store Select sub menu.
Use [F2] to set the BKGD item, [F3] to set the Key item,
[F4] to set the PinP1 item, and [F5] to set the PinP2
item.
On The bus settings are registered in the
memories.
Off The bus settings are not registered in the
memories.
Selecting the buses for playing back memory settings
Select the bus used for playing back shot memory or event
memory settings.
When the memory is played back, the settings of the
registered bus are played back.
Press the e button to light its indicator, and display the
Shot Memory menu (or Event Memory menu).
Use [F1] to display the Recall Select sub menu.
Use [F2] to set the BKGD item, [F3] to set the Key item,
[F4] to set the PinP1 item, and [F5] to set the PinP2
item.
On The bus settings are played back when the
memory is played back.
However, they will not be played back
if they have not been registered in the
memory.
Off The bus settings are not played back when
the memory is played back.
When the e button is pressed, the Shot Memory menu
(or Event Memory menu) appears on the built-in display,
and the information of the registered memories appears in
the status area on the built-in display.
However, the information is not displayed when the [EDIT]
button indicator is lit.
<Example of memory information display>
Page: 1 (1 to 10)