67
Basic
operations
1. Basic operations

1-12. Memory card

The unit’s video memory data and setup data can be stored
on memory card.
Conversely, this data can be loaded from the memory card to
the unit.
Furthermore, it is possible to upgrade the unit’s software.

Video memory (still image data: Still1, Still2):

<File formats supported>
Bitmap (bmp), JPEG (jpg), TARGA (tga), TIFF (tif), GIF (gif),
PNG (png)
<Applicable sizes>
HD/1080i: 19201080
HD/1080PsF: 19201080
HD/720p: 1280720
SD/NTSC: 720487
SD/PAL: 720576
The size of images is converted automatically if it does
not match any of the “applicable sizes”.
(The aspect ratio is not maintained. The enlargement or
reduction ratio in the top-bottom and left-right directions
will differ.)
The pixels of images in SD format are not square, so
the aspect ratio will be different when the images are
displayed on the computer and when they are imported
into video memory (with NTSC format, they will be
vertically long).
To keep the images true to their actual proportions, make
sure the original size is 720540 pixels. If the images
are in NTSC format, use images shrunk to 720487
pixels. If the images are in PAL format, use images
enlarged to 720576 pixels.

Video memories (moving image data: Clip1, Clip2):

This is the original format of the unit.
Data is stored in and read from these memories.

Shot memory data (Shot):

Data is stored in and read from these memories.

Event memory data (Event):

Data is stored in and read from these memories.

Setup data (Set Up):

The “setup data” refers to all the data stored in the unit with
the exception of the date, time and network settings and of
the still image data. The extension used for the setup data
files is “h41”.
All file (All):
All the following data is stored.
Video memory data, shot memory data, event memory data,
setup data
Plug-in software (Plug-in):
The plug-in software data is loaded.
It cannot be stored.
Software for upgrading (Upgrade):
The software for upgrading is loaded.
This software can be obtained from “Service and Support”
on the home page whose address is provided below:
http://pro-av.panasonic.net/en/
For the upgrade procedure, follow the steps in the
directions which are contained in the download file.
Log file (Log):
Log files stored in the unit can be saved.

Concerning memory cards

Memory cards used with the unit should conform to SD or
SDHC standards.
Be sure to format cards using the unit.
Memory cards with the following capacity can be used for
the unit.
SDXC memory cards are not available for this product.
SD (from 8 MB to 2 GB)
SDHC (from 4 GB to 32 GB)
For the latest information not available in the Operating
Instructions, visit the following Web sites.
http://pro-av.panasonic.net/
Memory cards must not be used or stored in an
environment where they may be
• Exposed to high temperatures/humidities;
• Exposed to water droplets; or
Electrically charged.