<REAR>
q w
e
r
MONITOR OUT
INITIAL SET
EXT I/O | SD |
1 2 3 4 | CARD |
LINK
POWER
u
i o
t | GND |
AC 24V IN : 1L – 2N
DC 12V IN : ! – @
y
!0
qPower indicator (green)
wLink indicator
eMonitor out connector (for adjustment) (ø3.5 mm, mini jack)
rINITIAL SET button
tExternal I/O terminals
yGround terminal
uAccess indicator
iNetwork connector
oSD memory error indicator (red)
!0AC 24 V/DC 12 V
Power cable terminals
•About the [INITIAL SET] button
Turn on the power of the camera while holding down this button, and wait around 5 sec- onds without releasing this button.
Wait around 30 seconds after releasing the button. The settings including the network set- tings will be initialized.
11
