Step 1
Start the Panasonic IP Setting software.
Step 2
Click the [IP Setting] button after selecting the MAC address/IP address of the camera to be configured.
Note:
•When using a DHCP server, the IP address assigned to the camera can be displayed by clicking the [Refresh] but- ton of the IP Setting software.
Step 3
Complete each network setup item and click the [Apply] button.
Important:
•It may take for around 30 seconds to complete to upload the settings to the camera after clicking the [Apply] button. The settings may be invalidated when the AC adapter or the LAN cable is dis- connected before completing the upload. In this case, perform the settings again.
•When using a firewall (including soft- ware), allow access to all UDP ports.
19
