Panasonic WV-NP244 operating instructions Specifications, Other specifications, Camera, Network

Specifications

Other specifications
Power source	AC 24 V or DC 12 V, PoE (DC 48 V)
Power consumption	AC 24 V 60 Hz 4.8 W, DC12 V: 400 mA
PoE:	4.2 W (Class 2 device)
Ambient temperature	–10 °C - +50 °C
Ambient humidity	90 % or less
Monitor output (for adjustment)
	VBS: 1.0 V [P-P]/75 Ω, composite,
	ø3.5 mm mini jack (monaural)
External I/O terminals	ALARM IN x1, ALARM OUT x1, AUX OUT x1
Audio	Captured by the built-in microphone
Dimensions	72 mm (W) x 65 mm (H) x 158 mm (D)
	(excluding connectors/terminals)
Weight	Approx. 470 g

Camera

Image sensor

Effective pixels

Scanning area

Scanning system

Resolution

Minimum illumination

AGC

Electronic shutter Sensitivity up White balance Electronic Zoom VMD alarm Aperture control ALC lens drive Lens mount

Network

Network Resolution

Image compression method

Refresh interval (MPEG-4)

1/3 inch interline transfer CCD 659 (H) x 494 (V)

4.8mm (H) x 3.6 mm (V) Progressive

VGA: 640 x 480,

QVGA: 320 x 240

1.5lx (F1.4)

Always ON (fixed)

AUTO

OFF, x2AUTO, x4AUTO, x8AUTO, x16AUTO

AUTO/HOLD

x1, x1.5, x2, x2.5, x3 ON/OFF, 4 areas available ALC/ELC (BLC ON/OFF) DC drive

CS-mount

10BASE-T/100BASE-TX, RJ45 connector VGA (640 x 480)/QVGA (320 x 240)

MPEG-4

Image quality: LOW/NORMAL/FINE

Transmission type: UNICAST/MULTICAST JPEG

Image quality: 0 SUPER FINE/1 FINE/2/3/4/5 NORMAL/6/7/8/9

LOW (10 steps: 0-9) Transmission type: PULL/PUSH

0.1fps – 30 fps (Frame rate of JPEG display will be limited when displaying JPEG and MPEG-4 simultaneously.)

21