Before Starting Installation | Panasonic WV-NW484S manual

Before Starting Installation

The following procedures are for installing the camera on walls and ceilings.

Important

•The type of screws for the installation depend on the material at the location in which you will install the bracket (included). However, do not use wood screws or nails. Metal material: Use M6 or M5 bolts and nuts for mounting.

Concrete wall: Use M6 or M5 anchor bolts for mounting.

(Recommended tightening torque M4 : 0.8 N·m {8 kgf·cm} M5 : 1.5 N·m {15 kgf·cm}

M6 : 2.5 N·m {25 kgf·cm})

•Be sure that the arrow on the installation bracket is pointing upwards.

•A pull-out force in excess of 294 N {30 kgf} is required for each screw used in the installation.

•Use sufficient reinforcement for installations on ceilings that are made of gypsum board and are weak.

Fixing the bracket (accessory)

•Use the bracket to install the camera on a wall or ceiling that is provided with a hole for passing the cable through or on exposed piping.

•Screws for fixing the bracket to a wall or ceiling are not provided. Choose screws in accordance with the materials and structure of the installation location.

•Screws for fixing the camera to the bracket are provided with the camera.

20

Image 20

Panasonic WV-NW484S operating instructions Before Starting Installation, Fixing the bracket accessory

Contents

Operating Instructions Accompanying the appliance Important Safety Instructions Disclaimer of Warranty Limitation of Liability Features Preface Preface About these operating instructionsSystem requirements for a PC Trademarks and Registered Trademarks Network Security Contents Action at an alarm occurrence Troubleshooting Specifications Precaution MPEG-4 Visual patent portfolio license SD Memory Card CCD Color Filter Burn-in Precaution Do not point the camera at a strong light SourceConsumables Dehumidifying Element Names of Components Names of Components Motion Detector FunctionsSuper Dynamic III SUPER-D Privacy Zone Setting Progressive outputAuto Back Focus Function Recording to an SD Memory Card Power over Ethernet Environments Installation and Connections Installation Precautions Power Supply by PoE About Static Electricity RemovalNetwork Connection Tightening the Screws Before Starting Installation Fixing the bracket accessory Installing the Camera Installing the Camera Install the camera on the mounting Enlarged view of a Connecting the Cables Power cable Brown LiveBlue Neutral Green/yellow GND Connecting the Cables Waterproofing Cable Joints Bottom side Water drain groove Adjusting the Camera Adjust the focus Adjusting the Camera How to Change the View AngleHow to Focus capturing subjects with a self-closing lens How to Use the Varifocal Lens and Zoom Lens Alarm In/Out Ratings Pin Arrangement of 4-pin Alarm Cable accessory Handling SD Memory Cards Insertion and Removal of SD Memory Cards How to Install the Heater Unit Heater Unit Network connection via a PoE-compatible hub Connection ExamplesDirect connection to a PC Network Setup Installing the SoftwareUsing the Panasonic IP Setup Software to Set Up the Camera Software in CD-ROM Network Setup Monitor Images on a PC Monitor Images on a PC Zoom Menu. → Setup Manual Live Monitor images from a single cameraWeb browser screen Monitor images from multiple cameras Multi-screen window Action at an alarm occurrence Action at an alarm occurrenceAlarm type Action at an alarm occurrence Setup screen Viewing HelpDisplaying the Help screen Help screen Troubleshooting AC/DC power supplyPoE power supply Camera does not Turn on Specifications AGC HIGH, F1.4, Wide Specifications LOW/HIGH Accessories Panasonic System Solutions Company Panasonic Canada Inc