Panasonic WV-NW484S operating instructions Installing the Camera

Installing the Camera

1Install the mounting bracket.

Fix the mounting bracket directly into the ceiling or wall or into the imbedded box using the four screws prepared in advance. (Note that screws for installation are not provided.)

When using the imbedded box, we recommend using two boxes in a row as shown in the figure below on the right. (This is to make it easier to pass the cables through.)

Cable pass-through hole

85 mm

Installation screws x 4

85 mm

Cable pass-through hole

51 mm

Center of metal installation bracket

46 mm

Note..................................................

• When installing the camera outdoors, waterproof the screws

and screw holes.

83.5 mm

......................................................

Installation screws x 4

2Loosen the three screws and remove

the enclosure.

Unscrew the screws using the driver

bit (provided).

Note..................................................

• When replacing the dome cover (WV-CW4C, sold separately), refer to the Operating Instructions provided with the dome cover.

......................................................

21