Panduit PN380 manual Connecting to a DPoE Power Patch Panel

PANDUIT DPoE Power System User’s Guide			Issue 1.0
			Part Number: PN380
		Power Connector on
		rear side of DPoE
		Power Patch Panel
	Butt splices connectors

48VDC Supply

Connector pinouts

Power connector housing with wire leads

Figure 3: Connecting to a DPoE Power Patch Panel

NOTE:

The included power harness has two wires for the A-feed power only (pins 1 & 2). The DPoE Power Patch Panel supports an optional redundant B- feed power option, but the terminals and wire leads are not attached to the power harness.

Contact PANDUIT Technical Support for more information about connecting the redundant B-Feed power.

WARNING:

The power supply connections on the DPoE Power Patch Panel are polarized.

The DPoE Power Panel will not function if power is wired improperly.

6