Parasound Halo C1 Controller manual Connecting a Digital Audio Recorder, What You May Need

CONNECTING AUDIO AND VIDEO SOURCES AND RECORDERS 45 continued

Connecting a Digital Audio Recorder

RCA Plug Toslink Connector

What You May Need:

•Two pairs of unbalanced interconnects with RCA plugs

•Two digital interconnects, Toslink or coaxial

•Digital audio recorder with digital and analog inputs and outputs

	Composite						Zone &
	Video Record			S-Video			Record	Digital Audio
		Out		Record Out			Outputs	Outputs
	Component Video Inputs and Outputs
Pr	Y	Pb
					CAUTION						C2 Controller
					DO NOT REMOVE COVER. NO USER
					TO PREVENT ELECTRIC SHOCK,
				Input 1	SERVICEABLE PARTS INSIDE,						Parasound Products, Inc.
					SERVICE PERSONNEL.
					REFER SERVICING TO QUALIFIED
											San Francisco, California, USA
				Balanced Analog Audio Inputs				Balanced Analog Audio Outputs
				Input 2
					Left	Right
				Input 3
				Output
Red	Green	Blue	H Sync	V			Coax	Digital Audio Inputs
Composite Video Inputs		Video Outputs		S-Video Inputs			S-Video Outputs			Made In	Expansion Port For
Video 1	Video 3 Video 5	Record	Zone	Video 2 Video 3	Video 4	Video 5 Video 6	RecordMain	Coax 1 Coax 3		Finland	Future Technologies
			Video 1					Optical 1	Optical 3
							Digital Out			External Control

RS-232 Control

IR Inputs

– 12V Triggers –

Video 2

Video 4

Video 6

OSD Main NoOSD

OSD

No OSD

Optical

Coax 2

Coax 4

Optical 2

Optical 4

Main

Zone

P1

P2

On-Off

Video 1

Video 2

Video 3

Video 4

Video 5

Video 6

Audio 1

Audio 2

Audio 3

Audio 4

Audio 5

Record 1 Record 2

Zone

Front

Surround

Center

Back

Front

Surround

Center

Back

Pro 1

Pro 2

AC Power

L

L

1

R

R

0

Play/In

Rec/Out

Sub

Sub

Pro 3

Pro 4

Analog Audio Inputs Tape Monitor Analog Audio Outputs 7.1 Analog Audio Inputs Main Analog Audio Outputs Programmable Out

Tape

Monitor	Analog		Analog		Digital	Digital
	Record/		Playback/		Optical	Optical
	Input		Output		Input	Output
	L	R	L	R

DIGITAL AUDIO

RECORDER

To record all your audio sources to a digital recorder you will need both analog and digital connections between the recorder and the C 1. This is because the Digital Out jacks carry the signal from the currently selected digital input but not from any analog input, and the analog record outputs do not carry signals from any digital sources. To make digital recordings from analog sources, use the analog Record or Rec/Out connections and the recorder’s analog input.