Parasound Halo C1 Controller manual 24ADJUSTMENTS, MENUS, AND SETUP continued

24ADJUSTMENTS, MENUS, AND SETUP continued

Audio setup

Dolby/DTS setup

Bass limiter setup

Preset setup

Treble		0dB
Bass		0dB
LFE level		–2dB
Reverb		Dry
Exit
Bass limiter setup
Bass limiter		Off
Limiter	level	—9dB
Limiter	noise	Off

Exit

Once again, pressing MENU on the front panel of the C 1, or rocking the Master remote’s thumbpad down, brings you to the next option, as shown by the on-screen cursor. And once again, turning the front-panel knob slightly or pressing the thumbpad on the Master remote brings up a list of options. For bass-limiter setup, the display would read:

Turning the knob a little or rocking the thumbpad to one side changes the setting or adjusts the function you’ve selected. For example, “Bass limiter” would go from Off to On and back to Off again, while “Limiter level” would change in 1-dB steps from –50 to 0 dB.

If you’ve finished making changes and would like to go to a different setup, you can save your changes and move back to a higher menu level by selecting “Exit” from the current menu, by rocking the thumbpad up or down, or by turning the front-panel knob, until you reach “Exit”. To exit

the current menu, press the center of the thumbpad or turn the front-panel knob one click. To save your changes and get out of setup altogether, press the STATUS button on the front panel or the MENU button on the Master remote. To get out of setup without saving your changes, press ESC (Escape) on the Master remote.

Each of the six setup titles in the Main Menu is the heading for a separate submenu; each sub- menu includes a number of control options or sub-submenus, which are described individually in the pages that follow.

Main Menu

Audio setup

Speaker setup

Source setup

Display setup

Trigger setup

THX Audio setup

Exit