ParkerVision WR1500 quick start Installation

®

4

WR1500 4-Port Wireless DSL/Cable Router

Start Here!

INSTALLATION

This section will guide you through the installation of the WR1500.

Unpack your WR1500 and make sure that everything is unwrapped and ready to begin.

First, either install, or make sure the antennas for the WR1500 are securely installed onto the rear panel of the unit.

A CAT-5 Ethernet Cable is supplied to connect between your computer and the WR1500. A picture of this type of cable is shown below.

Also shown below is an illustration of a typical installation for the WR1500.

The next page will describe the specifics of making these connections.