9
WR1500 4-Port Wireless DSL/Cable Router
Note - If the default password of “1234” is not accepted, refer to page 17 of this guide and go through the reset procedure to set all parameters back to factory defaults. Then try the above steps
again.
If you do not see the log-in window, go back and double check that the WR1500 is powered on, and that the Ethernet Cable between it and your computer is plugged in securely. If, after checking these items, you still cannot make contact with the WR1500, you may want to try a different Ethernet Cable. Also, refer to the troubleshooting section in the appendix of this quick start guide. If you still have
diffi culty with installation, contact support at 800-231-1759 or support@direct2data.com.
