WR1500 4-Port Wireless DSL/Cable Router
®
7
Make the connections as described below.
The rear panel of the WR1500 contains several ports,
as shown:
For initial setup, you should have:
• The power adapter plugged into the WR1500 as shown, and
this adapter plugged into a surge-protected electrical outlet.
• Your Cable or DSL modem’s Ethernet cable plugged into the
Internet-In port as shown above.
• An Ethernet cable plugged into the router port 1 as shown above,
and the other end of this cable plugged into your computer’s
Ethernet port.
Proceed to the Next Page to Begin Setting Up Your WR1500.
Plug the AC Adapter
into this port.
Plug your computer’s Ethernet
cable into Port 1. The
remaining ports can to be used
with other computers in a
hard-wired router fashion.
Plug your cable or DSL
modem’s Ethernet