Operator's Handbook
About the Handle
The printer is powered by a NiCad battery pack in the handle (power module). A NiCad battery lasts approximately two years with average daily use.
When you first receive the printer, you will need to fully charge the handle.
You can charge the handle with a:
∙wall charger. ... or ...
∙power module charger.
Refer to "Specifications and Accessories" for ordering information.
Charging Time
A full charge takes approximately 8 hours using the wall charger; approximately 1 1/2 hours using the 6094 Power Module Charger. Depending on which power charger you use, it can take
CAUTION
Always keep a handle attached to the printer. Storing the printer without a handle may erase or alter the memory.
Make sure you charge the handles for the time recommended.
4