Operator's Handbook
Cleaning the Print Head and Platen Roller
Clean the print head :
After
✓In high temperature or humid conditions.
✓When you see voids in the print (Figure 11).
In excessively dirty environments or with heavy usage, clean the print head and supply holder more often.
VOIDS | CORRECT PRINT |
Figure 11
Monarch recommends using the Pathfinder 6076™ Cleaning Kit and reading the instructions before cleaning.
1.Remove the roll of supplies. Check the supply holder for adhesive buildup, and clean with isopropyl alcohol.
2.Slide both latch buttons (Figure 12) to the rear twice and release them to completely open the platen carrier.
CAUTION
DO NOT use sharp objects to remove adhesive or label particles from the green print head area. This may damage the print head and void your warranty.
3.Check the platen roller and carefully remove any stuck labels or adhesive buildup.
44
