Operator's Handbook
Removing Supplies
1.Open the dust cover until it locks (Figure 6).
2.Tear evenly across the supply strip and remove the roll of supplies.
3.Push the power switch on.
If you don't see FORMAT? prompt, press 5 until you see the prompt.
Power
Switch
Backing
Paper
Figure 6
4.Press = 4. The display shows:
RELOADING
5.Press the trigger to feed the backing paper out through the rear of the printer.
6.Press 0 to exit. You'll see
SUPPLY? TYPE B
Enter 1 for TYPE? A or enter 2 for TYPE? B1. Press
1The supply type you enter can be found on the supply carton.
12