Operator's Handbook
Messages (continued)
Message | Corrective Action |
|
|
|
|
OVERHEAT | Ensure that you are operating or |
(when the power is first | storing the printer within the |
turned on) | recommended temperature listed |
| in the specifications. |
|
|
| Contact Monarch Service. |
|
|
Let the printer cool for a few | |
(while printing labels) | seconds. You don't have to turn the |
| printer off. When the printer is cool, |
| the display shows PRINTED. You |
| may begin printing. |
|
|
| If the message still appears. |
| Contact Monarch Service. |
|
|
PAPER JAM | Press = 3 to clear the message. |
|
|
| Check the label and backing paper |
| tracks per the maintenance |
| instructions. |
|
|
| Reload the supplies if necessary. |
|
|
| The label size set in the format does |
| not match the supply you have |
| loaded. Load the correct supply. |
|
|
RECHARGE | Turn the power off and replace the |
| handle with a fully |
| charged handle. |
|
|
| Recharge the used handle. |
|
|
SERVICE REQUIRED | Contact Monarch Service. |
|
|
STRIP LENGTH? | For offline printing models. Refer to |
| the Offline Features. |
|
|
48
