Operator's Handbook
Loading and Removing Supplies
The following steps are for the initial loading and removing of supplies (labels).
Loading Supplies
Check your management to see what supply size you need for your printer. If you run out of supplies while printing, leave the power on and skip Step 7.
1.Squeeze the side tabs on the dust cover, and rotate it open until it locks (Figure 3). The hubs will retract in the locked position.
Tear Here
Hubs
Dust Cover
Side Tabs
Figure 3
2.Remove the seal from the roll of supplies, and remove the first 10 tags or labels from the backing paper. Tear evenly across the backing paper.
8
