Error Codes
This section lists common error codes and what they mean.
Code(s) | Description | |
004 | - 005 | Supply size is incorrect. Reload the correct supplies. |
267 | – 271 | Communication error. See your System Administrator. |
410 | - 413 |
|
703 | - 704 | Supply Error. Load supplies or make sure they are loaded |
|
| correctly. See “Loading Supplies” in Chapter 3 for more |
|
| information. |
750 |
| Printhead is overheated. Turn off the printer to let it cool. |
751 | - 753 | The printer sensed a problem with a mark on the supplies. |
|
| Check the supplies to see if they are loaded correctly. |
756 |
| The printer is out of supplies. Load supplies. See “Loading |
|
| Supplies” in Chapter 3 for more information. |
757 |
| The calibrated supply length differs by plus or minus .25 |
|
| inches from the format. Load supplies. |
758Check supply. Either the supply is not seen, or the on- demand sensor is broken (purchase optional). Check for a label jam. Clear the supply path or reload supplies. The printer does not recalibrate after this error.
762 |
| Low battery. Recharge the battery. See “Charging the Main |
|
| Battery” in Chapter 2 for more information. |
763 |
| Waiting to dispense label. Press Enter. |
768 |
| Printhead error. See your System Administrator. |
790 | - 791 | The printer is busy or has an error pending. Turn off the |
|
| printer, wait two seconds, and then turn it back on. |
904 | – 911 | System error. See your System Administrator. |
SYSTEM | System error. See your System Administrator. | |
ERROR |
| |
VECTOR ## |
| |
T e c h n i c a l S u p p o r t
If these solutions do not work or you have a problem or error code not listed, see your System Administrator or call Service at the number listed on the back of this manual.
