C l e a r i n g S u p p l y J a m s
To clear a supply jam:
1.Turn off the printer and open the supply cover completely.
2.Open the label deflector by gently pressing down on it with two fingers.
3.Remove the supplies. See “Removing Supplies” in Chapter 3 for more information.
4.Carefully remove any jammed supply and close the deflector.
Note: Do not pull the jammed supply out through the front of the label deflector. Do not use sharp objects to remove jammed supplies.
5.Carefully remove any jammed supply between the pinch and feed rollers.
6.Clean any adhesive
7.Reload the supplies and close the label deflector.
Feed Roller
(behind Pinch Roller)
Pinch Roller
S t o r i n g t h e P r i n t e r
Do not store the printer in or near
♦magnetic fields
♦wet or damp areas
♦dirty or dusty areas
♦areas of intense vibration or shock.
