Cleaning the Printhead
Clean the printhead
♦after using
♦in extreme temperatures, humid conditions, or a dirty environment
♦when you see voids in the print
♦after a supply jam.
Cautions:
The following actions may damage the printhead and void your warranty.
♦Do not use silicone to clean or lubricate.
♦Do not use sharp objects to remove adhesive or label particles from the printhead area.
♦Do not touch the printhead with your fingers.
To clean the printhead:
1.Turn off the printer.
2.Open the supply cover and remove the supplies. See “Removing Supplies” in Chapter 3 for more information.
3.Check the supply holder for adhesive buildup and clean it if necessary.
4.Ground yourself by touching a metal object other than the printer.
Grounding prevents
electrostatic discharge, Printhead which may damage your
printer.
5.Clean the printhead area of all adhesive and label particles using a Monarch Cleaning Pen (#114226) or a soft cloth moistened with isopropyl alcohol.
6.Reload the supply roll and close the supply cover.
