Care of the Printer Installing Expansion
Cards Specifications Ordering Accessories Glossary
Media & InkIntroduction Front Panel Other
Printer
Options Index
Solutions
6. Insert the LAN cable into the LAN card. It is
simply pushed into place and clicks when
locked.
7. Carefully replace the plastic cover by
clipping it back into place:
•Put the two hinge clips on the side that
has the edge cable-hole into their slots.
•Swivel the cover in the direction oppo-
site to the embossed arrow and clip the
other two tabs on the opposite side into
their slots. Ensure that the LAN cable
passes correctly through the edge
cable-hole (shown by the yellow arrow).
•Take care to carefully route the LAN
cable so it does not interfere with the
spindle or roll.
8. Once you have completed the physical installation of th e card you will have to configure
it for you LAN, see Setting up the I/O Card.
Previous …
HP JetDirect Network Card Installation (Continued)