Solving Problems Image Quality
Problems Ink Supply
Problems Media Problems Image Error Other Problems Getting Help
Media & InkIntroduction Front Panel Other
Printer
Options Index
Solutions
Removing Jammed Paper1. Open the window.
2. Switch the printer off at the front.
3. If necessary, carefully move t he prin thead carri age ou t of th e w a y —if possible all the way to the enclosed area
on the left or the right. Which way you are able to move it depends on where the paper is jammed.
CAUTION: When moving the printhead carriage, touch only the black plastic parts.
4. If necessary, carefully move the paper cu tter ou t of t he w a y to t he lef t,
or to the right depending on where the paper is jammed (though if
moved right it may block the paper path).
CAUTION: The cutter is easily moved by holding it as close as
possible to the guide running across the width of the
printer. Be careful not to touch the metal slider bar that
runs across the printer.
5. If necessary, lift the blue paper lever, to release any trapped paper.
Remember to lower it again when you have finished.
6. Carefully remove any of the jammed paper which you can easily lift up and out from the top of the printer.
7. Carefully pull the rest of the roll or sheet down and out of the printer. You may need to cut the edge of the roll
with scissors.
8. Check that the printing zone, including the cutter guide, the paper path, and the area
where the printhead carriage is parked, is clear and clean; remove any paper powder by
brushing it away or with a vacuum cleaner.
More …
Slider bar
Guide