CS¨ 500A SPECIFICATIONS

MUSIC POWER (IHF-202):(Typical value, 120 VAC, 60 Hz) Stereo mode, both channels driven, 20 mS burst

2 ohms, 1 kHz, 1% THD: 400 W RMS per channel

4 ohms, 1 kHz, 1% THD: 275 W RMS per channel

8 ohms, 1 kHz, 1% THD: 165 W RMS per channel Bridge mode, mono:

4 ohms, 1 kHz, 1% THD: 800 W RMS

8 ohms, 1 kHz, 1% THD: 550 W RMS

CONTINUOUS POWER: (Typical value, 120 VAC, 60 Hz) Stereo mode, both channels driven

2 ohms, 1 kHz, 1% THD: 250 W RMS per channel

4 ohms, 1 kHz, 1% THD: 200 W RMS per channel

8 ohms, 1 kHz, 1% THD: 130 W RMS per channel Bridge mode, mono:

4 ohms, 1 kHz, 1% THD: 500 W RMS

8 ohms, 1 kHz, 1% THD: 400 W RMS

RATED POWER: (120 V AC, 60 Hz) Stereo mode, both channels driven

4 ohms, 10 Hz to 20 kHz, 0.03% THD:

190 W RMS per channel

8 ohms, 10 Hz to 20 kHz, 0.02% THD:

120 W RMS per channel

POWER SUPPLY DYNAMIC HEADROOM (IHF-202) Stereo mode, both channels driven, 20 mSec burst

2 ohms, 1 kHz: +2.04 dB

4 ohms: 1 kHz: +1.38 dB

8 ohms: 1 kHz: +1.04 dB

POWER BANDWIDTH:

Stereo mode, both channels driven

@ rated power, 4 ohms, <0.1% THD: 10 Hz to 50 kHz

TOTAL HARMONIC DISTORTION: Stereo mode, both channels driven

10 Hz to 20 kHz, 4 ohm @ rated output: Less than 0.03%

HUM and NOISE:

Stereo mode, both channels driven, 30 kHz BW, unweighted Below rated output power, 4 ohms: Greater than 100 dB

DAMPING FACTOR:

Stereo mode, both channels driven 8 ohms, 100 Hz: Greater than 300

INPUT SENSITIVITY and IMPEDANCE:

Input attenuator set @ FCW

@rated output power, 4 ohms: 1.0 V RMS (0 dBV), Phone jack impedance: 20k ohms unbalanced XLR impedance: 10k ohms per leg, balanced

CHANNEL VOLTAGE GAIN:

Input attenuator set @ FCW

Stereo mode, 4 ohms, 1 kHz: +29 dB

Bridge mode, 8 ohms, 1 kHz: +35 dB

FREQUENCY RESPONSE:

Stereo mode, both channels driven

+0, -1.0 dB @ 1 W RMS, 4 ohms: 3 Hz to 60 kHz

+0, -0.1 dB @ rated output, 4 ohms: 20 Hz to 20 kHz

SLEW RATE:

Stereo mode, each channel: Greater than 40 V/uS

Bridge mode, mono: Greater than 80 V/uS

SQUARE WAVE RESPONSE:

Stereo mode, 4 ohms, 80 V P-P output 100 Hz waveform tilt: Less than 5 volts

10 KHz waveform rise-time:Less than 2 uS, 0% over-shoot

PHASE DISTORTION:

Stereo mode, 4 ohms @ rated power

20 Hz leading waveform: Less than 6 degrees

20 KHz lagging waveform: Less than 15 degrees

POWER CONSUMPTION:

Stereo mode, both channels driven

@ rated output power, 4 ohms: 5 A @ 120 VAC

COOLING SYSTEM:

Dual continuously variable speed DC fans

DDTª COMPRESSION SYSTEM:

Automatic, switchable with LED indicator

DIMENSIONS and WEIGHT:

Height: 3.75" (9.53 cm)

Width: 19" (48.3 cm)

Depth: 16.88" (42.88 cm)

Weight: 30.3 lbs. (13.74 kg)

Specifications subject to change without notice.

10

Page 10
Image 10
Peavey CS 800S, CS 500S, CS 500A, 80304543 manual CS¨ 500A Specifications