5-Way Binding Post Outputs - Mode Connections
+ | + + |
| ||||||
Output |
|
|
| Output | ||||
|
|
|
| Bridge |
|
|
|
|
| Ch.B | Ch.A | ||||||
CLASS 2 WIRING MAY BE USED
Designed & manufactured in the USA by:
Crest Audio Inc.
100 Eisenhower Dr.
Paramus New Jersey, 07652 USA
1.Stereo Mode Connections
Either TRS or Input Barrier Strips (but not both) may be used for input connections to
Channels A & B. In this diagram, bare wire has been connected to the Input Barrier Strip of Channel A, while a TRS plug is being connected to Channel B.
| + | |
+ | + + | |
Output | Bridge | Output |
Ch.B | Ch.A | |
CLASS 2 WIRING MAY BE USED | ||
Designed & manufactured in the USA by:
Crest Audio Inc.
100 Eisenhower Dr.
Paramus New Jersey, 07652 USA
2. Bridged
Mode
Connections
Either TRS or Input Barrier Strips (but not both) may be used for input connection to Channel A.
B
+ | A | + | B | + | A | + |
+ | A B | + | + | A B | + |
|
|
|
|
|
A+B |
A+B |
|
| 3. Parallel Mode | |
|
| Connections | |
|
| Input is connected to | |
|
| Channel A using either a | |
+ | TRS connector or the Input | ||
|
| Barrier Strip (but not both). | |
|
| Jumper from Channel A | |
|
| to Channel B for | |
|
| ground is not | |
|
| necessary; however, | |
+ | + + | input ground connec- | |
tion to Channel A must | |||
Output | Output | ||
Ch.B | Bridge Ch.A | be made. | |
CLASS 2 WIRING MAY BE USED | |||
Designed & manufactured in the USA by:
Crest Audio Inc.
100 Eisenhower Dr.
Paramus New Jersey, 07652 USA
B
+
|
| A | + |
+ |
| + | |
A B |
|
A+B |
Crest Audio Multiplex Series Power Amplifiers | Page 9 |
