Pelco Manual C1943M (9/99) 3

IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and con-
form to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclo-
sure, it is designed for indoor use only and it must not be installed where exposed to
rain and moisture.
3. Only use replacement parts recommended by Pelco.
4. After replacement/repair of this unit’s electrical components, conduct a resistance
measurement between line and exposed parts to verify the exposed parts have not
been connected to line circuitry.
5. The installation method and materials should be capable to supporting four times the
weight of the enclosure, pan/tilt, camera and lens combination.
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
This symbol indicates that dangerous volt-
age constituting a risk of electric shock is
present within this unit.
This symbol indicates that there are impor-
tant operating and maintenance instructions
in the literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
DESCRIPTION
The CM9760-VCRC-P is another optional accessory of the System 9760®. The VCRC-P
gives security and surveillance operators the ability to automatically or manually control ap-
propriate VCRs from the 9760 matrix system. It is designed to remotely control seven basic
VCR functions (on Pelco’s TLR2096) using resistive ladder remote control.
Some of the more important features of the VCRC-P unit are as follows:
• Each unit can handle up to 64 VCRs.
• Each unit controls seven VCR functions: play, stop, fast forward, reverse, pause, record
and eject.
• Up to 39 units can be chained together giving a total of up to 2,496 VCRs that can be
controlled from a single Sercom port on the CM9760-CC1.
• There is one relay output per unit.
• The unit is powered by an auto-ranging power supply.
• Unique, one rack-unit chassis (1.75 inches or 4.45 cm) accommodates multiple types
of mounting.
• Transparent system software operates with the CM9760-IRC, the CM9760-VCRC, the
CM9760-VCRC-P, as well as the CM9760-REL.
NOTE:

Currently the

VCRC-P supports the fol-

lowing make and model of

VCR:

• Pelco TLR2096 96-hour

time-lapse recorder.