Pelco C2622M manual Table A. TX Mode Switch Settings, 10BASE-T/100BASE-TX Modes of Operation

			Table A. TX Mode Switch Settings
TX Mode
Switch Position			10BASE-T/100BASE-TX Modes of Operation
0	Auto Neg/Dis FC: Enables autonegotiation between 10 Mbps and
	100		Mbps and between half-duplex and full-duplex modes, disables
	flow control (default setting)
1	100		FD/Dis FC: Selects 100 Mbps full-duplex, disables flow control
2	100		HD/DIS FC: Selects 100 Mbps half-duplex, disables flow control
3	10	FD/Dis FC: Selects 10 Mbps full-duplex, disables flow control
4	10	HD/Dis FC: Selects 10 Mbps half-duplex, disables flow control
5	Auto Neg/En FC: Enables autonegotiation between 10 and 100 Mbps
	and between half-duplex and full-duplex modes, enables flow control
6	100		FD/En FC: Selects 100 Mbps full-duplex, enables flow control
7	100		HD/En FC: Selects 100 Mbps half-duplex, enables flow control
8	10	FD/En FC: Selects 10 Mbps full-duplex, enables flow control
9	10	HD/En FC: Selects 10 Mbps half-duplex, enables flow control

NOTE: Switch positions 0-4 disable flow control. Positions 5-9 enable flow control.

12 C2622M (2/07)