Pelco C2622M manual Product Overview, Description

Product Overview

DESCRIPTION

The FX82051 unmanaged Ethernet switch provides five 10BASE-T/100BASE-TX ports and one 100BASE-FX fiber port for the transport of bidirectional Ethernet data. Two fibers are required to transport bidirectional data over the fiber port. Available in multimode and single-mode versions, the FX82051 Ethernet switch is designed for point-to-point applications (refer to Figure 1).

FIVE 10/100 Mbps	FIVE 10/100 Mbps
CONNECTIONS	CONNECTIONS
FX82051	FX82051
	TWO
	FIBERS

Figure 1. FX82051 Point-to-Point Application

Features of the FX82051 Ethernet switch include the following:

•User-selectable networking functions for each 10BASE-T/100BASE-TX port:

–Autonegotiation between 10 Mbps and 100 Mbps data rates and between full-duplex and half-duplex modes

–10 Mbps or 100 Mbps selectable

–Full-duplex or half-duplex mode selectable

–Enabling/disabling of flow control

NOTE: The 100BASE-FX fiber port is automatically forced to full-duplex 100 Mbps operation.

•Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent Interface Crossover) operation

•Compliant with IEEE 802.3, 802.3u, and 802.3x standards

•Multimode fiber support for distances up to 6 km

•Single-mode fiber support for distances up to 46 km

•Compatible with other Ethernet equipment:

–10BASE-T/100BASE-TX compatibility with all Pelco® and third-party 10BASE-T/ 100BASE-TX Ethernet devices

–Fiber optic compatibility with all Pelco Ethernet devices that use two fibers per fiber port

–Fiber optic compatibility with third-party 100BASE-FX Ethernet devices (applicable to multimode ST and SC versions only)

•Laser diode for transmission of optical signals

NOTE: The FX82051 switch is a Class 1 laser product that complies with FDA radiation performance standard 21CFR Subchapter J and with IEC 60825-1 Edition 1.2, 2001-08.

•Environmentally hardened

6 C2622M (2/07)