S-EIDC-UWiring Terminals | Pelco c3653m-a specification

S-EIDC-U Wiring Terminals

Chapter 4: Wiring Connections And Configurations

S-EIDC-U Wiring Terminals

Output 1

+

Output 2

Input 1

Common

Input 2

Card Reader

IN

Power

OutPut 1

24V DC IN

Output 3 - NC

Common

Output 3 - NO

Input 3

Common

Input 4

Card Reader

Out

Power

Output 2

Reader LED Output

Reader Buzzer Output

The following circuit connections on the S-EIDC-U must occur in a “protected area” to meet UL requirements. A protected area is defined as being within the locked area of the access facility.

Input Power			Outputs
	PW1+		OC1
	PW1-		+
			OC2
	Relay Inputs		Relay Outputs
	IN1		NC
	C		C
	IN2		NO
	IN3
	C
	IN4

Input “C” is DC common or ground.

Relay Outputs “NC,” “C,” and “NO” must be connected to a lock within the same room to meet UL requirements.

Output “C” is common between the “NC” and “NO” contact on the relay. For example, if the relay is energized “NO” is connected to “C” and “NC” is not.

Intelli-M Hardware Installation And Reference Guide

27

Image 27

Pelco c3653m-a manual S-EIDC-UWiring Terminals

Contents

Hardware Installation And Reference Pelco, Inc. Worldwide HeadquartersC3653M-A11/08 Trademarks Preface Table of Contents Recessed Mounting Box UL Compliance S-EIDC-U, S-PCON-U Official NoticesFCC Declaration Of Conformity S-EIDC-U, S-PCON-U Official Notices Intelli-MHardware Overview Using This Manual Chapter 1 Intelli-M Hardware Overview Contents S-EIDC-U Intelli-MHardware Overview Chapter 1 Intelli-MHardware Overview Using This Manual Chapter 1 Intelli-MHardware Overview Chapter 2 S-EIDC-U ethernet Integrated Door Controller Contents S-EIDC-UOverview Technical Features Wiring S-EIDC-UDoor Components S-EIDC-UDoor Component WiringS-EIDC-U Keep in mind the following points Step 2: Wire the status, shunt, and exit inputsStep 3 Wire the readers Keep in mind the following points Four Power Options Powering Up An S-EIDC-U Determining The Network IP Address Type Setting A Static IP Address Within The S-EIDC-U Setting An S-EIDC-UFor DHCP Addressing Setting A DHCP IP Address Within The S-EIDC-U Resetting An S-EIDC-U Quick Mount AssemblyQuick Mount Assembly Breakdown Page Chapter 3 S-PCON-U Power Connector Contents Wiring And Powering Up S-PCON-US-PCON-UOverview S-PCON-UOverview Technical Features S-PCON-UWiring and Powering up Diagram Wiring And Powering Up S-PCON-U Chapter 3 S-PCON-UPower Connector S-EIDC-UWiring Terminals Chapter 4 Wiring Connections And ConfigurationsContents Sample S-EIDC-UGlobal Configuration Sample S-EIDC-UGlobal Configuration Chapter 4 Wiring Connections And ConfigurationsS-EIDC-U S-EIDC-UWiring Terminals S-EIDC-U Single Door Door Configuration With S-EIDC-U eFamily Update Procedure Appendix A eFamily Update UtilityContents Installing The eFamily Update Utility Web Interface Users Installing The eFamily Update Utility2.Launch double click the “setup.exe” file Supervisor Plus Users 6.Click the “Close” button Before Updating Your eFamily Device eFamily Update Procedure Figure A-6 Choice To Backup Screen Figure A-5 Connection Information ScreenFigure A-7 Connection Information Screen Page Figure A-11 Connection Information Request Screen Figure A-13 Update Complete Screen Figure A-12 Update In Process Screen Figure A-14 Example Error Message Errors That Occur During UpdatePage Output Configuration Appendix B Demo Kit WiringDefaults Input Configuration Controller Configuration Access Service ConfigurationAlarm Service Configuration Ethernet Integrated Door Controller S-EIDC-UTechnical SpecificationsDimensions Quick Mount Assembly Kit Enclosure Inputs PowerCommunication Reader Ports Power Connector Module S-PCON-U S-PCON-UTechnical Specifications Power ControllerOperational Dimensions DC Power --22.9 to 24 VDC, 1A Power InDC Power --24 VDC, 1A Power Out Performance Badging / Workstation Requirements Miscellaneous Computer Hardware SpecificationsPerformance Communications Server Requirements Minimum Server Requirements Signature Capture Minimum Badging / Workstation RequirementsDigital Camera USB Camera WebCam