S-EIDC-U Overview
Intelli-M’s S-EIDC-U (ethernet Integrated Door Controller) provides access control and alarm services for a single door. The cutting-edge technology of Power over Ethernet (PoE) allows you to run a single cable carrying both power and data for the controller and all peripheral door hardware. The controller has LEDs built into it for verifying connections to peripherals in the security system.
Intelli-M S-EIDC-U
The footprint of the controller is 1.70" W x 2.82" H x 1.30" D. It has flash-base memory capability, and can be updated with the latest firmware data via a simple flash upgrade. Instructions on how to perform an update to the S-EIDC-U can be found within this manual in “Appendix A: Intelli-MS-EIDC-U Update Utility.”
Technical Features
The Intelli-M S-EIDC-U has the following technical features:
•Supports a local database of 1,500 card holders
Note: Consult a Pelco Product Support Engineer for installations with more than 1,500 cardholders.
•16,000 local event buffering
•Two reader ports for entry and exit configurations (with or without keypads)
•Supports DHCP or Static IP addresses
•Provides encrypted communication (AES 128 bit)
•Embedded Web server provides complete control of the device without the need of a server for a stand-alone door
•Integrated, non-mechanical, infrared tamper sensor for high reliability and precision
•Built-in warning buzzer provides a local alarm without requiring an external alarm device
