Pelco c3653m-a Appendix B Demo Kit Wiring, Defaults, Input Configuration, Output Configuration

Appendix B: Demo Kit Wiring

The following data provides the default configuration parameters if wiring the S-EIDC-U for a demo kit.

Important: An alarm is defined within Intelli-M as an event (i.e., alert) that is sent to the software monitoring the S-EIDC-U. This is not a “burglar alarm” nor has it has not been verified by UL.

S-EIDC-U Demo Kit Wiring

Defaults:

•Inputs: Demo Kit Inputs (Push buttons or Toggles) should be wired as Normally Open

•Outputs: Initial Status = De-Energized

Input Configuration:

•Input 1: Door Contact (NO)

•Input 2: REX (NO)

•Input 3: REX Free Egress (NO)

Output Configuration:

•Output 1: Door Strike (DE)

•Output 2: Alarm LED (DE)

•Output 3 Door Status LED (DE)

•Output 4 Buzzer (DE)

Intelli-M Hardware Installation And Reference Guide 39