Pentax 15635, 15613, 15624 Shooting with a Remote Control Unit Optional, 119, A standby status

Shooting with a Remote Control Unit (Optional)

The shutter can be released from a distance by using an optional remote control unit.

h Remote Control		The shutter is released immediately after the shutter
		release button on the remote control unit is pressed.
i	Remote Control	The shutter is released about 3 seconds after the shutter
	(3 sec. delay)	release button on the remote control unit is pressed.

Shooting with a remote control unit is not available in the following situations.

•when p mode, or \(Moving Object)/Z(Pet)/R(Kids) of H mode is set

•when Interval Shooting is set

1 Mount the camera onto a tripod.

2 Press the four-way controller (5) in standby mode.

The Drive Mode setting screen appears.

3
	Use the four-way controller (45) to select h.
4
	Press the four-way controller (3),
		Remote Control
	use the four-way controller (45)
	to select hor i, and press the 4
	button.
	The remote control receiver on the front
	of the camera will blink and the camera is	MENU Cancel	OK OK
	in a standby status.

5 Press the shutter release button halfway.

119

4 ShootingFunctions

The autofocus system operates.