Pentax 15667, 15613 Use the four-way controller 23 to, Select a sensitivity value, and use, Value

3
	Press the 4button.
	If you select [Auto], [Low], [Medium], [High] or [Off], proceed to Step 7.
4
	Use the four-way controller (23) to select [Setting], and press
	the four-way controller (5).
	The screen to set the noise reduction level according to the ISO
	sensitivity appears.
5
	Use the four-way controller (23) to
			High-ISO NR	1 2
	select a sensitivity value, and use
			100
	the four-way controller (45) to set		200
			400
	the level of noise reduction which is
			800
	applied to the selected sensitivity		1600
			3200
	value.
			6400
	The sensitivity values displayed vary		MENU	Reset
	according to the [1. EV Steps] and
	[2. Sensitivity Steps] settings made in the [ACustom Setting 1] menu.
	Available operations
	Rear e-dial (S)	Switches between [High-ISO NR 1] and [High-ISO
		NR 2].
	dbutton	Resets the set value to the default setting.
6
	Press the 3button.
	The screen that was displayed in Step 2 appears again.
7
	Press the 3button twice.
	The camera is ready to take a picture.

97

4 ShootingFunctions