Pentax 15624, 15613, 15635, 15758, 15646 150, Select from ±1 EV, ±2 EV default setting or ±3 EV

Use the four-way controller (23) to select [Exposure Bracket Value], and press the four-way controller (5).

150

5 ShootingSettings

3 Use the four-way controller (23) to select [Auto Align], and use the four-way controller (45) to select O or P.

OUses Auto Align. Activates Shake Reduction according to the [Shake Reduction] setting. (default setting)

PDoes not use Auto Align. Deactivates Shake Reduction.

4

5 Use the four-way controller (23) to set the range in which to change the exposure, and press the 4button.

Select from ±1 EV, ±2 EV (default setting) or ±3 EV.

6 Press the 3button twice.

The camera is ready to take a series of pictures.

• The procedure of Step 2 can also be performed through the control panel.

•When both Shake Reduction and Auto Align are activated, take note of the following points.

•Make sure to hold the camera firmly so that the composition of the picture does not change while the three images are captured. If there is a great difference of the composition between three images, Auto Align may not be possible.

•Images captured with HDR Capture are susceptible to camera shake and blur. Be sure to set a higher shutter speed and a higher ISO sensitivity.

•When the sensitivity is set to [ISO AUTO], the sensitivity can be raised more easily than normal.

•Auto Align may not be possible when lenses that have a focal length exceeding 100 mm are used, or when the entire subject is checkered or has a uniform surface.

•In Z(Night Scene HDR) mode, [HDR Capture] is fixed to [Auto] and the Auto Align function is enabled.

•If [One Push File Format] is assigned to the V/Ybutton, pressing the button temporarily deactivates HDR Capture and saves captured images in RAW+.