Pentax 15613, 15635 Setting the Focal Length, 258, Turn the rear e-dial S to set the focal length

Make sure that [Shake Reduction] is activated, and turn the camera off.

Refer to “Reducing Vertical and Horizontal Camera Shake” (p.114) for details.

Attach a lens, and turn the camera on. The [Input Focal Length] screen appears.

258

Setting the Focal Length

The Shake Reduction function operates by obtaining the lens information such as focal length. Set the focal length when using a lens for which the focal length information cannot be automatically obtained.

1

2

3 Turn the rear e-dial (S) to set the focal length.

Select from the following focal length values. (The default setting is 35 mm.)

8	10	12	15	18	20	24	28	30	35
40	45	50	55	65	70	75	85	100	120
135	150	180	200	250	300	350	400	450	500
550	600	700	800

Input Focal Length

3035 40

MENU Cancel OK OK

10

Appendix

• If the focal length for your lens is not listed above, select the value closest to the actual focal length (example: [18] for 17 mm and [100] for 105 mm).

•When using a zoom lens, select the actual focal length at the zoom setting being used in the same manner.

4 Press the 4button.

The camera is ready to take a picture.

• To change the focal length setting, use [Input Focal Length] in the [A Rec. Mode 3] menu.

•When using a lens without an sposition or a lens with an sposition with the aperture ring set to a position other than s, set [23. Using Aperture Ring] to [Enable] in the [ACustom Setting 4] menu. (p.259)