Pentax 15668, 15613, 15635, 15624, 15758, 15646, 15679, 15698 Adjusting the White Balance Manually, 145

Select Kin Step 2 on p.144, and press the four-way controller (3).

5 Press the 4button.

The screen that was displayed in Step 2 appears again.

6 Press the 4button.

The camera is ready to take a picture.

To set the white balance for when the flash discharges, select [Auto White Balance], [Unchanged] or [Flash] in [10. WB When Using Flash] of the [A Custom Setting 2] menu.

Adjusting the White Balance Manually

You can adjust the white balance depending on the light source when taking pictures.

145

5

1

2 Use the four-way controller (45) to select K1 to K3.

Manual White Balance

SHUTTER Adjust

Check

MENU Cancel INFO WB± OK OK

Shooting Settings

3 Under the light you wish to measure the white balance of, select a white area as the subject.

Or, fully display a white sheet of paper in the center of the viewfinder or monitor.

4 Press the shutter release button fully.

Set the focus mode to \ when the shutter cannot be released. The screen to select the measuring range is displayed.