Pentax 15656, 15613, 15635, 15624, 15758 216, Turn the rear e-dial S to display the Memory 2 screen

216

2 Use the four-way controller (23) to select an item, and use the four-way controller (45) to select O or P.

Turn the rear e-dial (S) to display the [Memory 2] screen.

Memory	1 2
Flash Mode
Drive Mode
White Balance
Custom Image
Sensitivity
EV Compensation
Flash Exposure Comp.
MENU

7

Changing Additional Settings

OSettings are saved even when the camera is turned off.

PSettings are returned to their default values when the camera is turned off.

3 Press the 3button twice.

The screen that was displayed before selecting the menu item appears again.

•In [Shooting Info Display], you can set whether to save the type of information displayed in standby mode. (p.27)

P	The status screen is always displayed first when the camera is
	turned on.

The display selected from the Shooting Info Display selection

Oscreen (other than [Electronic Compass]) appears when the camera is turned on.

•Set [File No.] to O to continue the sequential numbering (four digits) for the file name even if a new folder is created.

	The file number of the last image saved to the previous folder is
O	saved and subsequent images are assigned sequential file
	numbers even if a new folder is created.
P	The file number of the first image saved to a folder returns to 0001
	each time a new folder is created for saving images.

• When [Reset] of the [R Set-up 2] menu is performed, all Memory settings return to the default values. (p.217)