110

• Turn the rear e-dial (S) while pressing the m button to change the EV compensation value. (p.119)

•The aperture value can be set in increments of 1/3 EV or 1/2 EV. Set the exposure steps in [1. EV Steps] of the [ACustom Setting 1] menu. (p.120)

•The proper exposure may not be obtained with the selected aperture value when the sensitivity is not set to [AUTO] (p.95).

4 ShootingFunctions

Exposure Warning

If the subject is too bright or too dark,

the shutter speed will blink on the status screen and LCD panel and in the

viewfinder. When the subject is too bright, set the aperture to a smaller lens opening (larger number), and when too dark, set the aperture to a larger lens opening (smaller number). Once blinking stops, you can take a picture with proper exposure.

Use a commercially available ND (Neutral Density) Filter if the subject is too bright. Use a flash if it is too dark.

Using the L(Shutter & Aperture Priority) Mode

You can set both the desired shutter speed and aperture to take the picture.

Automatically sets the sensitivity so that the manually set shutter speed and aperture value will give the proper exposure according to the brightness of the subject.

1 Set the mode dial to L.