3 Press the 3button.

The screen that was displayed before selecting the menu appears again.

4 Aim the camera at the subject and press the shutter release button halfway.

The following indicators appear on the status screen.

qShake Reduction On + Horizon Correction On r Shake Reduction Off + Horizon Correction On

• Set [Shake Reduction] to l(Off) when using the camera with a tripod or when this function is not needed.

•The Shake Reduction function automatically turns off in the following situations. Note that the Shake Reduction function cannot be selected when the following functions are set.

-p(Bulb) mode

-Self-timer shooting

-Remote Control shooting

-Mirror Lock-up shooting

-when [Auto Align] is set to P(Off) in the [HDR Capture] setting

-when using the flash in wireless mode

• The Shake Reduction function will not fully work (for about 2 seconds) right after turning on the camera or restoring from Auto Power Off. Wait for the Shake Reduction function to become stable, and then press the shutter button gently. If kappears in the viewfinder when you press the shutter release button halfway, the camera is ready to take a picture.

•The Shake Reduction function is available with any Xcompatible PENTAX lens. However, when the aperture ring is set to a position other than the s (Auto) position for a lens with a s position or a lens without an s position is used, the camera will not operate unless [27. Using Aperture Ring] is set to [Permitted] in the [ACustom Setting 4] menu. Set this beforehand. In such cases, however, some functions will be restricted. Refer to “Notes on [27. Using Aperture Ring]” (p.339) for details.

141

4 ShootingFunctions