6 When a spot area is selected, use the four-way controller (2345) to move the frame to the position you want to measure.

209

7 Press the 4button.

The white balance fine-tuning screen appears when measuring is completed. Adjust the white balance as necessary. (p.207)

Manual

 

1

White Balance

 

 

SHUTTER Adjust

 

G

 

 

 

±0

±0

B

A

 

 

 

 

 

M

±0

 

 

AE.L

MENU Cancel

Check

OK OK

8 Press the 4button.

The camera returns to the [White Balance] screen.

9 Press the 4button.

The camera is ready to take a picture.

• No image is recorded when the shutter release button is pressed to adjust the white balance.

•The message [The operation could not be completed correctly] appears when measuring is unsuccessful. Press the 4button while displayed to remeasure the white balance.

•If a picture is extremely overexposed or underexposed, the white balance may not be adjusted. In this case, adjust exposure to the correct amount level before adjusting the white balance.

•When the mode dial is set to C (Movie), the white balance cannot be measured. Adjust the white balance in any exposure mode other than C before recording a movie.

6 ShootingSettings