Rotating Images

249

When pictures are taken with Xheld vertically, the vertical position sensor activates and rotation information is added to the image to enable playback with the correct image orientation. You can change the rotation information and save the image using the following procedure.

• When [23. Saving Rotation Info] in the [ACustom Setting 4] menu (p.92) is set to [Off], the image rotation information is not saved when shooting.

•When [Auto Image Rotation] (p.236) in the [QPlayback 1] menu is set to O (On), an image with rotation information is automatically rotated during playback.

You cannot change the image rotation information in the following conditions.

-when the image is protected

-when the image rotation information tag is not saved with the image

-when [Auto Image Rotation] (p.236) in the [Q Playback 1] menu is set to P(Off)

1 Select the image you want to rotate in Playback mode. 2 Press the four-way controller (3).

The playback mode palette appears.

3 Use the four-way controller (2345) to select s(Image Rotation) and press the 4button.

The selected image is rotated in 90° increments and the four thumbnail images are displayed.

4 Use the four-way controller (2345) to select a desired rotation direction and press the

4button.

The image rotation information is saved.

MENU Cancel

OK OK

7 PlaybackFunctions