18

Aperture value

22

Main face detection frame

19

EV bar

 

(Face Detection AF)

20

Sensitivity

23

Face detection frame (Face

21

Remaining image storage capacity

 

Detection AF)

*Indicator 9 is displayed when switching to Live View after adjusting the composition in [Composition Adjust.] (p.220) in the [ARec. Mode 2] menu.

*Indicator 11 is displayed when [Electronic Level] is set to O(On) (p.299). When the Electronic Level function is assigned to the /Ybutton (p.285), press the /Ybutton to switch the display on/off.

*Indicator 13 (Phase Difference AF frame) is displayed in white during Live View. When the subject is in focus, a green square frame is displayed instead. It turns red when the subject is not in focus. It is not displayed when the focus mode is set to \.

*When 17, 18, and 20 can be changed, 5appears next to the set value.

*Indicators 22 and 23 are displayed when [Autofocus Method] is set to I and the camera detects person’s face(s). (Up to 16 face recognition frames are displayed on the monitor.) When the subject is in focus, a green frame is displayed. It turns red when the subject is not in focus.

Available operations

Mbutton

Enlarges the image.

 

2, 4, or 6 times original size (when the focus mode is

 

=)

 

2, 4, 6, 8 or 10 times original size (when the focus

 

mode is \)

button

Returns the position of the display area to the center

 

(during enlarged view).

Press and hold 4 Switches the function of the four-way controller

button *1

(2345) to Change AF point or direct key operation.

4button *1

Returns the position of the AF point to the center

 

(when Change AF point is enabled).

Four-way controller

Changes the AF point (when Change AF point is

(2345)

enabled).

 

Moves the display area (during enlarged view).

*1 Available only when [Autofocus Method] is Ior i, and the focus mode is l or the AF point switching dial is set to j(Select).

3 Position the subject on the monitor and press the shutter release button halfway.

The autofocus system operates.

When the focus mode is set to \, turn the focusing ring until the subject is clearly visible on the focusing screen.

169

4 ShootingFunctions