306

5 Use the four-way controller (23) to select the AA battery type and press the 4button.

When set to [Auto-detect], the camera will automatically detect the type of batteries being used.

Select Battery

 

AA Battery Type

 

AUTO

 

 

AUTO

Auto-detect

 

 

 

 

 

 

 

 

Ni-MH

Nickel-Metal Hydride

 

 

 

 

AL

Alkaline

 

 

 

 

Li

Lithium

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU Cancel

 

OK OK

6 Press the 3button twice.

The screen that was displayed before selecting the menu appears again.

• If batteries are inserted into both the body and grip, the battery levels of both are checked when the power is turned on. Regardless of the [Select Battery] setting, both batteries are slightly used.

•When the currently selected battery runs out as a result of the check, the message [Battery depleted] appears on the monitor. Turn the camera off and on again, and the camera will switch to the remaining battery.

•You can check the battery usage condition on the status screen and LCD panel. (p.52)

When the type of AA batteries inserted in the battery grip differs from the battery type setting in Step 5, the battery level will not be correctly determined. Please set the correct battery type. Usually, there is no problem using [Auto- detect]. However in low temperatures and when using batteries that were stored for long periods of time, set the appropriate battery type so the camera can correctly determine the remaining battery level.

9

Settings Additional Changing