112

4 ShootingFunctions

Exposure Warning

If the subject is too bright or too dark,

the sensitivity will blink on the status screen and LCD panel and in the

viewfinder. In such situations, change the shutter speed and aperture. When the indication stops blinking, you can take a picture with proper exposure.

Use a commercially available ND (Neutral Density) Filter if the subject is too bright. Use a flash if it is too dark.

Using the a(Hyper-manual) Mode

You can set the shutter speed and aperture value. This mode is suitable to take pictures of your choice by combining them. This mode is convenient for taking pictures using the same combination of the shutter speed and aperture settings or taking intentionally underexposed (darker) or overexposed (brighter) photographs.

1Effect of Aperture and Shutter Speed (p.93)

1 Set the mode dial to a.

2 Press the button.

The shutter speed and aperture value are automatically switched to obtain a proper exposure.