Available operations

4button

Returns the AF point to the center of the AF

 

frame.

Press and hold 4button

Disables changing the AF point and enables

 

direct key operation of the four-way controller

 

(2345). To enable changing the AF point,

 

press the 4button while direct key

 

operation is enabled. You will hear a beep

 

when switching between enabled and

 

disabled.

The AF point(s) light red in the viewfinder (Superimpose AF Area) and you can check where you set the AF point.

The position of the changed AF point is stored even if the camera is turned off or the focusing area is switched to Uor S.

Vappears in the viewfinder when the AF point can be changed.

When any of the following operations are performed, changing of the AF point (in Step 3) is canceled.

-the main switch is turned off

-the mode dial is turned

-the AF point switching dial is turned

-the Q button, 3button, Mbutton or Ubutton is pressed

129

4 ShootingFunctions