Pentax Optio S manual Zxcvm, Taking Panorama Pictures Panorama Assist Mode, Take the first picture

e03_kb341_028_078_41e.qk 03.2.14 4:06 PM Page 58

b

zxcvm

Taking Panorama Pictures (Panorama Assist Mode)

You can take a number of images and join them together to form a panorama picture. The panorama software provided with the camera and a computer that supports Windows are neces- sary for joining the images.

memo

Caution

nMove the camera to the right and take the second picture.

Repeat the above procedure to take the third and subsequent pictures.

mPress the OK button.

The screen returns to Step v.

To cancel Panorama mode, change to another mode.

•The camera cannot join the images. Use the panorama software provided with the camera.

•Continuous shooting is not possible in Panorama Assist mode.

•A computer that supports Windows is necessary for join- ing images to form a panorama picture. (The software

provided with the camera is not supported by Macintosh.)

Taking Pictures

zPress the four-way controller ( ) in Capture mode.

The virtual mode dial appears.

x Use the four-way controller ( ) to display the Panorama Assist

mode ( ) at the top of the dial.

cPress the four-way controller ( ).

vUse the four-way controller to choose the direction in which the images will be joined.

S e t s h i f t d i r e c t i o n

Taking Pictures

Joins the images at the left. Joins the images at the right. Joins the images at the top. Joins the images at the bottom.

The example shows the images when is selected.

bTake the first picture.

Press the shutter release button to take the first image. The right edge of the image is displayed in trans- parent form on the left of the LCD monitor.

58 59