PSF Software Ver.365
4 DISTANCE STAKEOUT
Detailed Operating procedures
Access the DISTANCE STAKEOUT according to "1. ACCESSING THE SPECIAL FUNCTIONS".
Step 1 Selecting the distance to be displayed and inputting the design values.
(1)
DISTANCE STAKEOUT
ENT
|
| 1 .H.dist. |
| SELECT |
|
| Input H.dist. | ||||
|
|
|
|
|
|
|
| ||||
ENT |
| DIST COMPARE | To Step 2 |
*Input the S.dist. and V.dist. in the same way.
Step 2
(1)
STAKEOUT start
TRACK / MEAS
Move the prism to the ground point where the deviation is "0"
(2)
(3)
Use the ground point where the deviation is "0" as the STAKEOUT point
Use the [ENT] key to exit |
| Go back to |
the STAKEOUT function |
| Step 1 |
|
|
|
If necessary,
repeat the measurement
Use the [ESC] key to exit the distance
A prism can be easily tracked if a position is searched by using a [TRACK] function and then using a [MEAS] function.
24