Coordinates | Pentax R-322(N), R-325(N), R-335(N), R-323(N), R326

PSF Software Ver.365

6 COORDINATES

General pictures of measurement

Any desired Target coordinates can be determined and stored by setting a Station Point as an original point and inputting the Backsight coordinate in COORDINATES measurement. The coordinates values from Original coordinates point can be determined by the Station coordinates input even if the Station Point is not set as original point. Coordinates values input can be omitted by designating the Station Point No. whenever the Station coordinates are stored in the internal memory.

General pictures

Z

N

Target

Backsight Point

Target

Station Point

E

Detailed Operating procedures

Access the COORDINATES according to " ACCESSING THE SPECIAL FUNCTIONS ".

1. JOB NAME

(1) JOB NAME input				( Selection keys: ⇐ , ⇒ , ⇑ , ⇓				)

	1.JOB NAME			ENT		COORDINATE JOB NAME INPUT

		JOB NAME input by pressing selection keys							ENT

(2)JOB NAME selection ( Selection keys: ∆ , ∇ , ⇑ , ⇓ )

1. JOB NAME

ENT

COORDINATES JOB NAME INPUT

ENT

SelecttheJOBNAMEby shiftkeys

ENT

Totheprimary screenoftheCOORDINATES

The JOB NAME can be selected only when the JOB NAMES are already stored.

27

Image 28

Pentax R-322(N), R-325(N), R-335(N) JOB Name ENT Coordinate JOB Name Input, JOB Name ENT Coordinates JOB Name Input

Contents

Special Functions PSF Software Ver.365 Document Ver Copyright Power ESCENT Help Meas TargetDisp Mode Relations between memories and each Special function Contents Resection DataLink DL- 01 Software Introduction Introduction Example COORD. Stakeout Accessing the Special FunctionsCOORD.STAKEOUT can be Accessing by Help KEY Accessing the Special Functions 000 109 COORD. Stakeout General pictures of measurement JOB Name input Alphanumeric keys and arrow key JOB Name selection Number List screen Station Coordinates Station Coordinates inputNumber screen Input the Y and Z Coordinate Coordinates Input screenStation Coordinate which is Backsight Selection screen is viewed Search and call of the stored Station CoordinatesENT key to view the Instrument Height Input screen Coordinates Input Backsight Selection a. Coordinates inputNumber screen Input the Backsight point number Search and Call of the stored Backsight Point Number Foresight Number List screen afterBacksight Point Number Confirm the Backsight Point Coordinates Procedures 2 of 3. Stakeout Input and Stakeout of Foresight Point Number and Coordinates Input the Foresight point number Input the Foresight point CoordinatesCompare screen Aim at the Backsight point and input Azimuth angle in case Rotate the instrument horizontally and stop Search and Call of the stored Foresight Point Number Distance Stakeout Distance Stakeout Distance Stakeout ENTENT Dist Compare Track / Meas RDM REF.P-PReference Point REF.P.-P Observation of the reference point Observation of the target point P1 JOB Name ENT Coordinate JOB Name Input CoordinatesJOB Name ENT Coordinates JOB Name Input Search and call of stored Station Coordinates Search and call of the stored Backsight P. Number Azimuth input ENT Description Select Description Input Prism H Measured PointStore / ENT Offset Shots H are offset valueOffset Point Obstacle JOB Name input Selection keys JOB Name selection Selection keys , ⇒ Coordinates input Backsight Coordinates input Search and call of the stored Backsight CoordinatesCoordinates Input ENT Select Description Input ENT Coordinate Offset point survey Target point survey REM Observing the reference pointObserving the target ENT Input Prism H Resection JOB Name input Selection keys , ⇒Stored JOB Name selection Selection keys , ⇒ ENT Station Point Input Point B survey Point C survey Description Select Resection Descriptioninput ENT ENT Y Select ENTPrism H Select Prism H Select ENT Data Storage JOB Name selection Selection keys ∆ , ∇JOB Name ENT Survey JOB Name Input JOB Name ENT Survey JOB Name Station Setup ENT Station Point Input ENT Description SelectENT INSTR. H ENT Store Select Memory Manager Send by input of the stored Coordinates JOB Name Memory Manager Shift to a desired JOB NameSelect Baud Rate ENT Receive Delete by input of the Coordinates JOB Name Delete by search of the Coordinates JOB Name Search & shift to stored JOB Name Send by input of the Survey JOB NameSurvey Data Send ENT Send by search & call of the Survey JOB Name Delete by input and call of the Survey JOB Name Delete by search and call of the Survey JOB NameENT Over Write Memory Manager ENT DataLink DL- 01 Software Recommended communication settings on DL-01 PN,X,Y,Z,Code Mail international@piic.pentax.co.jp First edition TS01101EB2